Contact biometry proto

General Details:

Name:: Contact biometry proto
Steward:: PhenX
Definition:: The axial length of the eye and central corneal thickness is measured in this protocol using the Ultrasonic A scan/pachymeter DGH 4000B SBH IOL Computation module. (A-Scan pachymeter, Ultrasonic, Exton, PA) which requires direct contact with the cornea. Three measurements are taken on each eye for both axial length and central corneal thickness. Results of all measurements are then printed. The WG recommends that three readings be taken and recorded from each eye for both axial length and central corneal thickness (measurements in millimeters). The WG recommends that the central corneal thickness-pachymetry measurements be taken first followed by the axial length measurements, as presented in this protocol. This protocol for contact biometry uses the ultrasonic A scan/pachymeter DGH 4000B SBH IOL Computation module. Other instruments can be used to measure ocular biometry including axial length and central corneal thickness. If other instruments are used, the reproducibility of the measurements should be comparable to those acquired with this protocol. In addition, when other instruments are used to collect these measurements, the manufacturer and model of equipment should be recorded. These other devices may require some different steps than are described in this protocol. Investigators should follow the equipment manufacturer's instructions to ensure quality control.
Registration Status:: Qualified

Definition:: The axial length of the eye and central corneal thickness is measured in this protocol using the Ultrasonic A scan/pachymeter DGH 4000B SBH IOL Computation module. (A-Scan pachymeter, Ultrasonic, Exton, PA) which requires direct contact with the cornea. Three measurements are taken on each eye for both axial length and central corneal thickness. Results of all measurements are then printed. The WG recommends that three readings be taken and recorded from each eye for both axial length and central corneal thickness (measurements in millimeters). The WG recommends that the central corneal thickness-pachymetry measurements be taken first followed by the axial length measurements, as presented in this protocol. This protocol for contact biometry uses the ultrasonic A scan/pachymeter DGH 4000B SBH IOL Computation module. Other instruments can be used to measure ocular biometry including axial length and central corneal thickness. If other instruments are used, the reproducibility of the measurements should be comparable to those acquired with this protocol. In addition, when other instruments are used to collect these measurements, the manufacturer and model of equipment should be recorded. These other devices may require some different steps than are described in this protocol. Investigators should follow the equipment manufacturer's instructions to ensure quality control.
Tags:: Source: Regenstrief LOINC

Key:

Related Names

Value:

Key:

Related Codes

Value:

Code System	Code	Code Text	Code Version
https://www.phenxtoolkit.org	110101	axial_length_using_contact_biometry

Key:

Fully-Specified Name

Value:

Component	Property	Time	System	Scale	Method
PhenX - contact biometry protocol 110101	-	Pt	^Patient	-	PhenX

Key:

Basic Attributes

Value:

Class	Type	First Released	Last Updated	Change Reason	Panel Type
PANEL.PHENX	Clinical	Version 2.36	Version 2.66	Updated the PhenX ID from "PhenX." to "PX" in Survey Question Source field to align with the variable identifier used in the PhenX Toolkit.; Added the PhenX protocol ID to the Component to clearly define the protocol version for which this panel is based upon.	Panel